Dynabrade DynaRed 22017 Polishing Compound (Dyna One Fine Finish) – 1 l

Dynabrade DynaRed 22017 Polishing Compound (Dyna One Fine Finish) – 1 l

The new generation of one-step polishing compound from Dynabrade. DynaRed 22017 (new packaging Dyna One – Fine Finish) quickly and cleanly removes P1000 / P1200 sanding marks on fresh and fully cured clear coats, paints, gelcoats, and other hard surfaces. Silicone-free – safe for body shops and detailing use.

Recommended pads (quick guide)

• Blue foam pad – ideal for fresh paintwork, fast cut with a very good finish.
• Grey foam pad – for older or harder paint systems, stable heat management and good control.
• Micro Buffing pad (e.g. 73502) – for localized scratch and scuff repair.
• Black foam pad (e.g. 72901) – final finishing for maximum gloss depth.

Quick application guide

1. Lightly prime the pad with compound, then apply 3–4 drops to an area of approx. 40 × 40 cm.
2. Spread at low speed, then gradually increase speed (medium pressure → light pressure) until a clear film appears.
3. Wipe off with a microfiber cloth and inspect under strong lighting. Repeat if necessary or switch to a softer pad.
4. For a show-car finish, make a final quick pass with a soft black pad using no pressure.

Suitable surfaces

Clear coats, colored paints, gelcoats, coated plastics, metals, and other hard surfaces.

Specifications

• Volume: 1 l
• Type: one-step (cut & finish)
• Formula: silicone-free
• Machine types: rotary / DA

Tip: Final results depend on paint hardness, pad selection, and polishing technique. On very hard paint systems, it can be more effective to start with a more aggressive cutting pad and then finish quickly with a soft pad.