ColorMatic High Gloss 2K Clear Coat – 200 ml Spray (187216)

Fast-drying 2K acrylic clear coat with a high-gloss finish in a practical ColorMatic spray can by Motip. The clear coat and hardener are stored separately; after 2K activation, they are mixed inside the can and the spray is ready to use. Ideal for bicycle frames, helmets, scooters, smaller motorcycle parts or wheels.

Activation and application

• 2K activation: press the pin in the bottom of the can according to the pictogram, then shake for 2–3 minutes.
• Coats: apply 2–3 full coats with approx. 2 minutes flash-off time between coats.
• Coverage / film thickness: approx. 0.3–0.4 m² per 200 ml can; final film thickness approx. 50 µm with 2–3 coats.
• Drying at 20–25 °C: dust-dry after approx. 5 minutes, touch-dry after approx. 5 hours, fully dry after approx. 24 hours.
• Heat resistance: up to approx. 120 °C.
• Pot life: after activation, use ideally within 24 hours.

Compatibility and use

• Topcoat 2K clear coat for standard 1K/BC basecoats, including metallic, pearl, solid colours and special-effect paints.
• The surface must be dry, clean, degreased and sanded according to the coating system.
• After full curing, the clear coat can be machine polished.

Parameters

• Volume: 200 ml
• Number of coats: 2–3
• Coverage: 0.3–0.4 m² per can
• Heat resistance: 120 °C
• VOC: approx. 118.6 g

Practical tips

• Spray from a distance of 15–20 cm using crosswise passes with approx. 60–70% overlap.
• Allow the basecoat to flash off properly to help prevent pores, mapping or surface defects.
• Need a larger amount? Consider the 500 ml version or spray-gun clear coats in the Clear Coats section.

Safety

2K aerosol contains isocyanates and solvents. Work in a well-ventilated area and use suitable PPE, such as an A2/P2 respirator, gloves and safety glasses. Always follow the instructions on the packaging and the SDS.